For screen reader problems with this website, please call937-434-97709 3 7 4 3 4 9 7 7 0Standard carrier rates apply to texts.

    Audio Etc

    Audio Etc

    937-434-9770

    Thorens® Ultimate Sub-Chassis Turntable

    Model #: TD 907-Anthracite

    At a Glance

    Thorens® Ultimate Sub-Chassis Turntable with ten-step adjustable pneumatic damping architecture and conical polypropylene membrane under the platter bearing

    WarningProposition 65 Warning for California Residents
    Thorens® Ultimate Sub-Chassis Turntable

    General Specs

    ColorBlack
    Width (in.)18.50
    Depth (in.)14.96
    Height (in.)7.48
    Drive TypeBelt-Drive
    Turntable Speed33 1/3; 45
    Analog Audio(RCA) Output2

    Thorens® Ultimate Sub-Chassis Turntable

    Model #: TD 907-Anthracite
    133880
    Model #: TD 907-Anthracite
    Thorens
    $99,999.00

    Call for Best Price

    At a Glance

    Thorens® Ultimate Sub-Chassis Turntable with ten-step adjustable pneumatic damping architecture and conical polypropylene membrane under the platter bearing

    Get to know this product.

    Tradition Reinterpreted

    The sub-chassis is made of triCom, an aluminum/POM composite characterized by excellent damping properties and high stiffness. Its weight has been optimized for high performance. To reduce vibrations, the synchronous AC motor is mounted directly onto the damped sub-chassis. It drives the sub-platter via a machined precision belt.

    The sub-chassis is suspended by means of three conical springs which can be adjusted from above in order to achieve uniform tension. The bearing is made of sintered bronze with a Teflon thrust pad and optimized for smooth running. The steel axle supported therein provides very low, constant friction and thus presents a uniform load to the motor. Two of the turntable’s three feet can be levelled from above, which facilitates setup.

    Depending on the model, different damping architectures, tonearm boards and platters are used. The design can accommodate a wide variety of 9" and 10" tonearms also from third-party manufacturers.

    Special Features

    Newly developed, ten-step adjustable pneumatic damping architecture

    A conical polypropylene membrane under the platter bearing is decoupled from the triCom base via a visco/propylene layer. The air chamber thus formed under the membrane vents into ten apertures in the base plate which can be opened or closed with a slide.

    Turntable feet with triCom and viscose foam insert, adjustable

    The tonearm board is also made of triCom and can be cut for almost any 9" and 10" tonearm at the factory.

    Three-Part Platter

    The polished aluminum platter features an acrylic insert that acts as a damping pad for the grooved area of the record.

    Tonearm Connection Options

    Standard: mini 5-pin DIN soldered to RCA/XLR

    Option: soldered directly to RCA/XLR terminals

    Specifications

    General Specs

    ColorBlack
    Width (in.)18.50
    Depth (in.)14.96
    Height (in.)7.48
    Drive TypeBelt-Drive
    Turntable Speed33 1/3; 45
    Analog Audio(RCA) Output2
    WarningProposition 65 Warning for California Residents